Fibre Optic Cold Cure Termination Tool Kit

PRODUCT NUMBER: FCCTTK
£359.99 Ex VAT (£431.99 Inc VAT)
Availability: Currently out of stock but available for back order
ALTERNATIVE PRODUCTS
SUGGESTED PRODUCTS

Description

This kit is essential for Fibre Installers to enable fibre termination without the need for a curing oven.

What's Included:

  • Hard Case
  • Tool Bag Foam
  • 1.25mm Polishing Jig
  • 2.5mm Polishing Jig
  • Extra Durable Cleanroom Wipes
  • IPA saturated Cleaning Wipes
  • Miller Bi Hole Stripper
  • Small Fibre Disposable unit
  • Miller Kevlar shears
  • 400x Mag Microscope
  • Scripe Pen
  • Loctite Anarobic Adhesive 680
  • Loctite Anarobic Adhesive 7649
  • Polishing Paper 5um
  • Polishing Paper 0.03um
  • Polishing Paper 30um
  • Polishing Mat
  • Needle & Syringe

FAQs

Q&As

 

Q: What is the difference between SM and MM fibres?

A: The main difference between SM and MM fibres is the core size, SM has a 9um core and MM has 62.5um or 50um core size?

 

Q: What is the difference between G652D and G657A1/A2/B2/B3 fibres?

A: SM G652D fibres are traditionally used for long haul connectivity and are entirely backwards compatible with G657 fibre types. The new Bend insensitive G657 fibres are optimized for use at the customer premise, in the cabinets or splice enclosures due to the increased capacities and higher fibre counts required for modern networks

 

Q: What is the cable length of a 1mtr cable?

A: The total length of all assemblies includes the connectors; therefore the length is 1mtr from ferrule tip to ferrule tip +/- 50mm tolerance.

 

Q: What is the maximum pulling force when installing the cable?

A: The maximum force is between 70N-100N, depending on the fibre optic connector and cable diameter size used?

 

Q: Why does the cable diameter influence the cable pull force?

A: The cable pull force is higher on larger diameter cables, due to the number of Aramid/kevlar bundles increasing in 3.0mm patch cords.

 

Q: Do I need to test the jumpers/patch-cords?

A: We recommend that you always inspect and test any patchcord, before connecting to your network. All our cables are factory tested for SM IL & RL and end-face inspection to the relevant industry standards.

 

Q: What is the maximum crush resistance of the patch cords?

A: The maximum crush resistance depends on the patch cords diameter- 2.0mm = crush resistance of 500N/100mm for short term and 100N/100mm for long term.

 

Q: Are the patch cords compatible with various modules or SFP?

A: Yes, all LC connectors are compatible with SFP, SFP+ (BIDI SFP+) and XFP's. All SC connectors are compatible with BIDI SFP, GBIC, X2 and XENPAK

 

Q: Why is Singlemode cable yellow?

A: Multimode fibres initially were standardized by cable jacket colour, the old standards were Beige or Grey Jacket for OM1 62.5/125um and Orange for OM2 50/125 fibre types. Although today you can be supplied Orange cable jacket for both OM1 & OM2 fibre types. (OM1 & OM2 can support speeds from 1Gbps to 10Gbps over a short distance). The evolution of networks and data demands mean we now have new 50/125 Multimode cable types, OM3 colour of Jacket Aqua, OM4 colour of Jacket Heather/Violet and OM5 Lime Green. OM3 and OM4 fibres have been optimized for higher speeds over longer distance to support data rates from 1Gbps to 100Gbps. OM5 is for future networks of 100Gbps and beyond, optimized for CWDM (Coarse Wavelength Divisional Multiplexing) of 4 channels per Multimode fibre core.

 

Reviews

Average Rating

0 Reviews
No reviews yet
5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0

Write a Review

You must be signed in to leave a review.

Write a Review

Shipping

We offer a variety of shipping options to suit your individual requirements. You can choose from the following shipping methods at the checkout:

Standard Shipping

This is a next working day service which is free of charge on order values above £100 Exc VAT to the UK mainland. For orders under this value a charge of £10 Exc VAT will be applied.


Express AM Shipping

If you urgently need your order, you can select express AM shipping which will guarantee delivery by noon next day. This is a set price of £20 Exc VAT regardless of the value of your order.
 

Express Pre 10:30 Shipping

If you urgently need your order, you can select express Pre 10.30am shipping which guarantees your delivery by this time next day. This is a set price of £24.95 Exc VAT regardless of the value of your order.


International Shipping

We also offer international shipping to select countries. Please note that delivery times may vary depending on the destination. To obtain a price for international shipping please contact us.


Order Processing Time

Once we receive your order we endeavour to process and ship it to you as quickly as possible. Most orders are processed within 1 hour. This does exclude weekends and holiday. Our order cut off time for next day delivery is approximately 4.00pm. Please note that during peak seasons or promotional periods, it may take us slightly longer to process your order.

Tracking Your Order

Once your order has been despatched you will receive a confirmation email with a tracking number. You can use this number to monitor the progress of your shipment via our website or through the relevant carrier company’s online tracking system.

If you would like more information on our delivery terms & conditions click here