Regarding cable management, correctly installing a wire mesh basket tray or cable tray is crucial for safety and efficiency.  

The short answer is that you need to measure up, choose the right tray type, install strong fixings, and follow cable capacity guidelines.  

Sound simple? With the right tools and know-how, it can be. 

Let's break it down. 
 

Tools & Materials You'll Need 

Wire mesh basket tray or cable tray sections 

Tray couplers or splice kits 

Mounting brackets or suspension rods 

Spirit level 

Drill and fixings (anchors or threaded rods) 

Cable ties or velcro strips 

A tape measure (trusty and non-negotiable) 

Step-by-Step Installation 

Plan Your Route 

Map out the cable path. Consider entry/exit points, cable types, and load. Don't forget potential obstacles like beams or HVAC systems. 

Fix the Supports 

Space your supports about every 1.5–2m (depending on the tray type and weight). For suspended trays, use threaded rods and ceiling anchors. For wall-mounted trays, use strong brackets fixed into studs or solid walls. 
 

Secure the Tray Sections 

When joining sections with couplers or splice kits, ensure they're level. Uneven trays are not just unsightly; they're a trip hazard for your cables (and your credibility). 

Install the Cables 

Lay cables gently, no yanking. Avoid overloading the tray and keeping power and data separate to avoid interference. 

Label and Tidy Up 

Use Velcro straps or cable ties to secure bundles. Labelling now will save you headaches later. Your future self will thank you. 

Common Pitfalls to Avoid 

Overloading the tray (watch the weight rating) 

Poor support spacing—hello, sagging trays! 

Ignoring local regs or fire safety guidelines 

Forgetting about future capacity (it always grows) 

 

FAQs  

Do I need special fixings for different surfaces? 

 
Yes. Use ceiling anchors for concrete, cavity fixings for plasterboard, and masonry screws for brick or block. 

Can I mix power and data cables in the same tray? 

 
You can, but it's not best practice. To avoid electromagnetic interference, use divider strips or separate trays. 

What's the best way to cut wire mesh trays? 

 
Use bolt cutters or a hacksaw. Remember to file down the sharp ends—and wear gloves! 

How far apart should supports be placed? 

 
Typically, every 1.5–2 metres, but check your tray's weight rating and load. Heavier loads require closer spacing. 

Can I suspend trays from the ceiling? 

Absolutely. Use threaded rods with suitable anchors. It's an excellent option for keeping cables off the floor in tight or high-traffic spaces. 

 

Final Thoughts 

Installing a wire mesh basket tray or cable tray isn't rocket science but an art.  

At CMW, we supply installers, electricians, and wholesalers with the right gear and guidance to do the job right the first time.  

Need help choosing the correct setup? Give our team a shout, we're happy to help (and won't even judge your dodgy measuring tape).